Electrical elements of Europe Style Europe Style Suspension Eot Crane

The crane that we are offering is designed to meet the required functions and requirement stated in your specifications, as well as for the operating conditions.

The sub-assemblies used by are standardized equipment of renowned manufactures and have been

approved for specific crane operation by our test laboratory. Their characteristics regarding impact,

vibrations, wear and safety were examined. A continuous high quality standard is ensured by series

production and standardized sub-assemblies.

The electrical equipment is accommodated in robust steel plate control cubicles, on the crane girder.

All movements can be switched off by actuating the emergency-off switch at the control station

via a main contactor.

The entire equipment is easy to install and dismantle due to the use of threaded bolts and top-hat rails

Cable inlet from cable gland Power supply cable and control cable along the girder

A protective earth conductor is fitted as standard. A crane switch is provided.

Travel end switches Long and cross travel limited by means of preliminary and final limit switches

Overload protection: In the event of overload, the hoist unit switches off and only the lowering

motion is possible.

Technical parameters of Europe Style Europe Style Suspension Eot Crane

Capacity(t)

1t,2t,3t,5t

10t

16t

Span(m)

6.5m---28.5m

Lifting height(m)

3m---30m

Control mode

Pendant control,wireless remote control,cabin control

Lifting speed(m/min)

2.8 ,8 , 8/0.8

2.3 ,4, 7, 7/0.7

4, 4/0.4

Travelling speed(m/min)

10,20,30,45 (Inverter)

Service class(work grade)

A2,A3

A3,A4

A3,A4

Supply power(three phase power)

380V 50HZ 3Phase (according to user require)

Working ambient

temperature

-20 °C~+45°C

Hoist type

Wire rope hoise or chain hoist ; single or double speed

Note

It's not suitable for lifting blazing & melting metal or 

toxicant as well as explosionproof or 

insulating working conditions.